Category:A-26B-1-DL: Difference between revisions
No edit summary |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
This category shows all of the A-26B-1 model planes that were produced at Douglas Long Beach (DL). | The production of the Invader began first at the Long Beach plant. The solid-nosed B was actually the first off the production line (41-39100). The first of five A-26B-1-DL Invaders appeared in September of 1943. As compared with the prototype, the A-26B had an increased bomb load (6000 pounds) and higher internal fuel capacity of 1600 US gallons. The powerplants were housed in slightly revised nacelles and drove three-bladed propellers without spinners. The engines were a pair of 2000 hp Pratt & Whitney R-2800-27 radials. | ||
These planes were painted in typical WW2 bomber camouflage -solid OD Green with a neutral grey underbelly. | |||
This category shows all of the A-26B-1 model planes that were produced at Douglas Long Beach (DL). <br/> | |||
According to the Douglas Production List, the A-26B-1 was built: "The same as the A-26B-1-DO, except at the Long Beach plant".<br/> | |||
From the same production notes we know that the A-26B-1-DO was never actually built. The notes say:<br/> | |||
"(not built) similar to the (X)A-26, except for 75mm cannon in the nose; similar to the XA-26B except bombing installation provided and range finder not provided" <br/> | |||
From these notes we can deduce the following statistics: <br/> | |||
Paint: all-over olive drab over neutral gray bottom<br/> | |||
Wet Weight: 31,000 lbs <br/> | |||
Length: 51' 3" (15.24 m) <br/> | |||
Height: 18' 6" (5.64 m) <br/> | |||
Wingspan: 70' (21.34 m) <br/> | |||
Wing Area: 540 Sq. Feet (50.17 m²) <br/> | |||
Speed: 212 mph <br/> | |||
Max Speed: 370 mph <br/> | |||
Ceiling: 31,300 feet <br/> | |||
Powerplant: 2x Pratt & Whitney R-2800-27 <br/> | |||
Horsepower: 2,000 each <br/> | |||
Fuel Capacity: 1,600 US Gallons <br/> | |||
Range: <br/> | |||
Crew: 3 <br/> | |||
Passengers: 1<br/> | |||
Nose Guns: 1x 75mm Cannon <br/> | |||
Dorsal Turret: 2x .50 Machine Guns <br/> | |||
Ventral Turret: 2x .50 Machine Guns <br/> | |||
Payload: 4,000 lbs internal<br/> | |||
2,000 lbs wing points<br/> | |||
[[Category:A-26B-1]] | |||
Latest revision as of 19:13, 9 December 2019
The production of the Invader began first at the Long Beach plant. The solid-nosed B was actually the first off the production line (41-39100). The first of five A-26B-1-DL Invaders appeared in September of 1943. As compared with the prototype, the A-26B had an increased bomb load (6000 pounds) and higher internal fuel capacity of 1600 US gallons. The powerplants were housed in slightly revised nacelles and drove three-bladed propellers without spinners. The engines were a pair of 2000 hp Pratt & Whitney R-2800-27 radials.
These planes were painted in typical WW2 bomber camouflage -solid OD Green with a neutral grey underbelly.
This category shows all of the A-26B-1 model planes that were produced at Douglas Long Beach (DL).
According to the Douglas Production List, the A-26B-1 was built: "The same as the A-26B-1-DO, except at the Long Beach plant".
From the same production notes we know that the A-26B-1-DO was never actually built. The notes say:
"(not built) similar to the (X)A-26, except for 75mm cannon in the nose; similar to the XA-26B except bombing installation provided and range finder not provided"
From these notes we can deduce the following statistics:
Paint: all-over olive drab over neutral gray bottom
Wet Weight: 31,000 lbs
Length: 51' 3" (15.24 m)
Height: 18' 6" (5.64 m)
Wingspan: 70' (21.34 m)
Wing Area: 540 Sq. Feet (50.17 m²)
Speed: 212 mph
Max Speed: 370 mph
Ceiling: 31,300 feet
Powerplant: 2x Pratt & Whitney R-2800-27
Horsepower: 2,000 each
Fuel Capacity: 1,600 US Gallons
Range:
Crew: 3
Passengers: 1
Nose Guns: 1x 75mm Cannon
Dorsal Turret: 2x .50 Machine Guns
Ventral Turret: 2x .50 Machine Guns
Payload: 4,000 lbs internal
2,000 lbs wing points